When trailers stop disappearing
Sealed, battery-powered tracking for trailers, containers, and generators you attach exactly once.
The Family
Side by side
Hover a column to focus it. The rows line up connectivity, sealing, battery, and theft recovery, so you can match each tracker to where the asset actually lives.
Every tracker installs in seconds and reports into the same MyGeotab as your vehicles. Not sure what to tag? Talk to a specialist and we will map trackers to your assets.
The premium tracker in the family
Wire it to the asset's power and it stops being a location pin and starts being an operations record.
Wired in, it reports distance traveled, engine hours, and ignition state. "Where is it" becomes "is it earning," and the hours feed real service schedules.
Global 4G LTE (CAT1 bis) with Starlink Direct-to-Cell satellite connectivity, so assets keep reporting beyond cellular. Built for wellsite asset tracking for oil and gas and long rural hauls.
Dual-band GNSS, plus Bluetooth that reads external sensors and acts as a gateway for small-asset tags.
A 5,400 mAh field-replaceable backup battery. Rated IP67 and IP69K, operating from -40 to +85 C.
Trailers, generators, light towers, heavy attachments with a power source: this is their tracker.
A closer look
GO Anywhere is a sealed, self-powered tracker for the trailers, generators, and equipment that never see a wiring harness.
A sealed internal battery powers it for years with nothing to charge, swap, or maintain once it is attached.
A rugged, weatherproof housing shrugs off dust, water, heat, cold, and constant vibration.
Set how often it checks in, so nothing sits unaccounted for between jobs and seasons.
Geofence and after-hours alerts flag an asset leaving the yard before it becomes a theft report.
Location history turns a stolen trailer or generator into a recovery, not a write-off.
Powered vehicles and self-powered assets sit on the same MyGeotab map, not two logins.
Sealed and self-powered, so nothing in your yard drops off the count.
Real Outcomes
"This has provided new insight into asset utilization, fleet waste, and has dramatically improved employee safety. Truly unbelievable."Waldinger Corporation, Des Moines, IA
Theft Recovery When It Counts
If an asset moves unexpectedly, the tracker shifts to high-frequency updates to help you recover it, then returns to normal to save battery.
One recovered trailer can pay for the whole fleet's trackers.
Battery honesty
Visibility versus battery. You choose how each tracker spends it, per asset, in MyGeotab.
A fixed check-in every 8, 12, 24, or 48 hours, whether the asset moves or not. The yard-inventory mode.
The tracker logs trips as they happen and uploads the day's activity once per day. Maximum battery, full history.
Motion is reported in near real time, start and stop. For assets where "it just left" is the alert that matters.
On GO Anywhere Plus only: updates every 15 minutes while moving, and the mode shuts itself off after 72 hours so a stressed week cannot drain the battery.
Nobody becomes a battery accountant. We set the modes with you at rollout, asset class by asset class. The base GO Anywhere is configurable for time-based or movement-based check-ins to balance visibility against battery life.
The Whole List, Live
One sortable table with each asset's last report time, battery status, movement state, and current geofence or zone, for trucks, trailers, and iron in a single view.
Where it earns its keep
Trailers, generators, and attachments tracked across active job sites and the yard between them.
Wellsite and remote equipment spread across sites far from the yard, on the same map as the crew trucks.
Transformers, spools, and pole trailers staged across a wide service territory.
Implements and portable equipment that move between fields and storage by season.
Know what is on-rent, what is idle, and where every unit sits before you buy another.
NDAA and TAA compliant trackers for public fleets, yards, and shared equipment pools.
Small asset tracking
Bluetooth tags go on drills, saws, job boxes, and anything else that walks away, stuck on with adhesive or a zip tie.
What to tag
No power, no problem. Sealed battery trackers cover the untracked half of your operation, whatever shape it takes.
High-theft targets that sit unpowered for weeks between jobs.
Portable power that walks off site and is expensive to replace.
Buckets, augers, and hydraulics that get separated from the machine.
Ground equipment you would otherwise count by walking the lot.
Gear that disappears into a back lot until someone needs it fast.
Bluetooth tags read by the GO-equipped trucks that carry them.
Questions
Straight answer, per product: the battery-only GO Anywhere runs up to 3 to 5 years depending on how often you have it report. GO Anywhere Plus runs up to 5 years on battery, longer when wired to the asset's power, and its battery is field-replaceable. If someone quotes you ten years on these exact units, they are quoting a different product.
Powered or high-value assets that justify utilization data: GO Anywhere Plus, wired. Non-powered assets that live outdoors (containers, dumpsters, spare trailers): GO Anywhere. Tools and small equipment: Bluetooth tags read by your existing vehicles. We map this with you against your actual asset list, not a brochure.
On GO Anywhere Plus, Starlink Direct-to-Cell satellite connectivity picks up where cellular ends, so a tracker in a coverage hole keeps reporting instead of going dark and catching up later. For remote sites and long rural hauls, it removes the "no data since Tuesday" problem.
The base GO Anywhere is NDAA and TAA compliant, and GO Anywhere is available on Geotab's Sourcewell cooperative contract 102924-GEO (valid through April 2029). For compliance questions about GO Anywhere Plus on a specific bid, ask us for a current answer.
Yes. The per-asset price is low enough to tag hundreds of trailers, containers, and job boxes, not just your most expensive gear, so nothing falls off the map for being cheap.
Anything unpowered. The what-to-tag section above has the full list, and it all lands on the same map as your vehicles.
Yes. Live location and movement alerts help you find and recover assets quickly.
Keep exploring
Inside MyGeotab
Vehicle odometers beside trailer and equipment status, so a yard count happens on a screen instead of on foot.
Illustrative MyGeotab screen with fictional data
See it tracking your own trailers before you commit. Request a free demo and a fleet telematics professional will reach out right away.
