Geotab GO10 Vehicle Tracker
More built in. Less to install.
Geotab's modern plug-in tracker for 2010 and newer vehicles, with Bluetooth, controls and tamper detection built in.
Modern Hardware Without the Add-Ons
Capabilities engineered into one device, so you stop bolting on accessories to get the data you need.
Native Bluetooth
Connects to tablets, beacons and apps with no add-on dongle.
Integrated Auxiliary Controls
PTO, seatbelt and door status, plus remote immobilization.
Energy-Reserve Tamper Alert
Alerts the instant it is unplugged, even after power loss.
.png){kind=tracking}
Deep Vehicle Diagnostics
Pulls fuel, engine and EV data so faults surface early.
Nationwide 4G LTE
Connects on AT&T and Telus bands across North America.
Camera and Sensor Ready
Add cameras and sensors through the expansion port, no swap.
What 'Built In' Saves Your Fleet
Faster Installs, Fewer Parts to Fail
No Bluetooth Dongle to Buy
Expand Without Swapping Hardware
Integrated control pins replace aftermarket wiring kits, so installs are faster with fewer connectors to fail.
Bluetooth is built in and pairs with the driver app automatically, one less accessory per truck.
Add cameras, sensors and compliance tools through the expansion port when you need them, no device swap.
Deeper Diagnostics, No Extra Hardware
Built for Today's Vehicle Systems
The GO10 pulls fuel, engine and EV data from the vehicle's own systems, so fault codes surface early and feed maintenance before a breakdown.
Captures deep fuel, engine and EV performance data
Engine fault codes surface for early maintenance
Reads modern vehicles built 2010 and newer
Tamper Detection That Will Not Go Dark
Know the Moment a Device Is Unplugged
A built-in energy reserve fires an alert the instant the device is pulled, even after power is cut, so theft and tampering get caught.
Internal reserve sends an alert after main power loss
Real-time notification the moment it is unplugged
Stops drivers from going dark to avoid tracking
Where the GO10 Pays for Itself
Less Hardware to Buy Up Front
No add-on dongles or wiring kits to buy per vehicle.
Breakdowns You Schedule Instead
Early fault alerts turn a tow into a shop visit.
Today's Spend Scales With You
Grow your setup later without replacing the device.
Common Questions About the Geotab GO10
What is the Geotab GO10?
The Geotab GO10 is the next-generation plug-in GPS fleet tracker. It connects to a vehicle's OBD-II port and reports location, engine health and driver behavior, with more built in than older trackers so you bolt on fewer add-ons.
What makes the GO10 a next-generation tracker?
It builds in features that used to be separate add-ons, including Bluetooth, integrated vehicle controls and a tamper alert that fires even if the device is unplugged. That means fewer accessories to buy, wire and maintain.
Will the GO10 work on my vehicles?
The Geotab GO10 is built for vehicles model-year 2010 and newer, and reads modern engine and EV data directly from the vehicle. If your fleet runs older trucks, reach out and we'll match you to the right Geotab tracker.
Is the GO10 easy to install ourselves?
Yes. It plugs into the OBD-II port and sets itself up in minutes, with no wiring or technician. Because more is built in, there are fewer add-on parts to install or fail.
Does it alert me if a driver unplugs it?
Yes. A built-in power reserve sends a tamper alert the moment the device is pulled, even after the vehicle's power is cut, so no one can quietly drop off the radar.
Can I add dash cameras or sensors later?
Yes. The Geotab GO10 has an expansion port, so you can add dash cameras, driver ID or sensors as your needs grow, without replacing the tracker.
Ready to Modernize Your Fleet Tracking?
One device that does more straight out of the box
See how much you can stop bolting onto your vehicles. Fill out the form below for a free GO10 demo and a fleet telematics professional will be in touch right away.
.png)